Can-am Commander | Side Enclosure
Item# GM-COMSE
Description
Fits:
2011-2020 Can-am Commander
The side enclosures are made from 600 denier Sunmaster fabric and feature automotive-grade clear acrylic side windshields sewn into the upper section of the doors.
They are compatible with hard fronts, soft rears, soft tops, and hard tops. The doors are fully removable and have double pull zippers for easy access.
Each pair includes self-adhesive Velcro, installation instructions, and is priced as one driver and one passenger enclosure. The doors can be removed for ventilation on warmer days, and the enclosures work with most soft tops and can integrate with many hard tops.
When paired with the rear windjammer, you can fully enclose your UTV.
Installation:
2011-2020 Can-am Commander
The side enclosures are made from 600 denier Sunmaster fabric and feature automotive-grade clear acrylic side windshields sewn into the upper section of the doors.
They are compatible with hard fronts, soft rears, soft tops, and hard tops. The doors are fully removable and have double pull zippers for easy access.
Each pair includes self-adhesive Velcro, installation instructions, and is priced as one driver and one passenger enclosure. The doors can be removed for ventilation on warmer days, and the enclosures work with most soft tops and can integrate with many hard tops.
When paired with the rear windjammer, you can fully enclose your UTV.
Installation:
- Place the side cover against the roll cage/frame, ensuring straps engage the roll bar along the top, rear, and sides. The cover should align straight with the frame.
- Attach the top straps loosely around the roll cage to allow adjustments, then repeat on the other side.
- Align the web straps with grommets in front of the door and attach them to the corresponding screws on the UTV. Remove the screws, thread them through the grommets, and tighten.
- Remove the screw behind the door that matches the grommet inside the enclosure, reinstall the screw through the side enclosure, and tighten.
- (Optional) Clean areas for self-adhesive Velcro with rubbing alcohol and attach the Velcro to the corresponding spots on the cover. If not using the adhesive, remove the adhesive sections and only use the soft loop against the plastic.
- Install the supplied Velcro around the sides and door openings, matching it to the cover.
- Attach the clips with elastic to the UTV as shown in the instructions.
- Finally, tighten all previously loose Velcro straps to secure the side enclosure.
- The doors can be zipped out and stored on warmer days, and it's recommended to zip them up for high-speed travel or long distances.
PLEASE READ - SHIPPING TIME FRAME:
- This item is custom made to order and will take 1-2 weeks for the item to ship.
- During the winter and holiday season, it may take up to 3-4 weeks for this item to be completed. This is an estimated time frame only.
- Please place your order in plenty of time to receive it when you need it or call for an updated time-frame.
- Expedited shipping is NOT an option for this product - we cannot accept UPS Next Day, UPS 2nd Air or UPS 3Day select.
