High Lifter Polaris RZR XP 1000 Max Clearance Front Lower Control Arms

The Max Clearance Front Lower Control Arms feature a dual bend design giving you the most clearance you can get from the frame to the hub without adding a lift. Our a-arms provide more than 2” of additional clearance where you need it the most. We designed the Control Arm Kit specifically for RZR owners who are concerned about the additional wear and tear on a UTV when adding a standard lift kit. By maintain factory drivelines and positions, there’s no added wear and tear on your RZR’s components – including the CV axle joints.

The a-arms are crafted from 1 1/16” x .120 wall steel DOM tubing – a serious upgrade from factory materials. Each a-arm features additional gussets adding even more strength where you need it most. Additionally, the a-arms can reuse your factory ball joints and bushings.

This kit also includes zirk fittings for optimum placement, avoiding areas where they can hit the frame and break off. The kit fits just like stock with no bending, welding, or grinding needed for installation.

NOTE: Be sure to check for worn ball joints, bearings, and bushings before installation and replace them if needed. For ball joints, see BJP-4. For bearings, see WBK-25-1628.

Proudly made in the USA.

Fits: Polar RZR XP 1000 and RZR XP 4 1000

Fitment Note: If a customer is running the stock/OEM Polaris RZR 1000 wheels, the stock/OEM wheels will rub the rear bar on this control arm kit and will rub the paint off the OEM wheels and control arms at the contact points The rubbing is due to the narrow offset on the stock/OEM wheels. A minimum of 1" wheel spacer is required when running the OEM/stock wheels with this kit. Please see Part Numbers WT4/15612-15 for 1" spacers or WT4/15612-15 for 15" spacers.

Usually ships in 2-3 business days