Polaris Ranger XP 570 | XP 900 | XP 1000 Cab Back/Dust Stopper
Item# emp-11893
Description
Fits: 2013-18 Ranger XP900
2015-18 Ranger XP900 Crew
2015-18 Full Size Ranger 570 w/Pro-Fit cage
2015 Ranger 570 Crew
2016 Ranger XP570
2017 Ranger XP1000
2017 Ranger XP1000 Crew
(If your cage is the Pro-Fit cage these will fit if it is round tube cage they will not. The 2016 Full-Size Ranger 570 has a round cage and different front suspension) The 2016 Ranger XP570 has a Pro-Fit cage.
The EMP Polaris Ranger XP Cab Back / Dust stopper is an excellent value because of its combination of quality, durability, looks, and price.
Unlike other Ranger XP Rear Panels, EMP uses only MR-10 hard-coated Polycarbonate to keep wind, dirt, and debris out of the ranger. EMP could have used a lesser material to keep the cost down, but they pride themselves in their quality and only MR-10 Lexan would do.
Nothing is worse than the vaccuum effect, caused by installing a roof and windshield, drawing in a bunch of unwanted dust into the cab. It makes both work and play much less enjoyable in the Ranger XP 900. Keep the dust out and keep yourself clean by installing the EMP rear panel.
2015-18 Ranger XP900 Crew
2015-18 Full Size Ranger 570 w/Pro-Fit cage
2015 Ranger 570 Crew
2016 Ranger XP570
2017 Ranger XP1000
2017 Ranger XP1000 Crew
(If your cage is the Pro-Fit cage these will fit if it is round tube cage they will not. The 2016 Full-Size Ranger 570 has a round cage and different front suspension) The 2016 Ranger XP570 has a Pro-Fit cage.
The EMP Polaris Ranger XP Cab Back / Dust stopper is an excellent value because of its combination of quality, durability, looks, and price.
Unlike other Ranger XP Rear Panels, EMP uses only MR-10 hard-coated Polycarbonate to keep wind, dirt, and debris out of the ranger. EMP could have used a lesser material to keep the cost down, but they pride themselves in their quality and only MR-10 Lexan would do.
Nothing is worse than the vaccuum effect, caused by installing a roof and windshield, drawing in a bunch of unwanted dust into the cab. It makes both work and play much less enjoyable in the Ranger XP 900. Keep the dust out and keep yourself clean by installing the EMP rear panel.
- Made from 3/16" MR-10 Hard Coated Polycarbonate
- Fits inside the rear of the cage
- Bolt-on, all hardware include
- Install instructions included
- Foam gasket seals it to the cage
- Made in Cleveland Ohio
