RZR XP 1000 PyroPak ECU Controller

Fits: 2014+ RZR XP 1000, 2014+ RZR XP 4 1000 (Make sure to select correct year above)

The days of trial and error with jets and carburetor settings are over! EFI is the new way in power sports and the DragonFire PyroPak ECU Controllers are the solution to your EFI tuning needs. Whether you have a bone stock motor or a completely built racing engine, the PyroPak gives you the ability to tune in almost every aspect of your UTV. The PyroPak allows for full control of your engines fuel settings, ignition timing and rev-limiter. With an easy to use computer software program and the ability to add self-tuning devices like the PyroPak Auto-Tuner, anyone can tune like a pro! Take control of your Side-X-Side with the PyroPak controller and Feel the Heat!

Features:

• Allows for fuel settings, ignition timing and rev-limiter adjustments
• Piggy back, plug-n-play system with the ability to tune further on the provided computer software
• USB powered from computer (9 volt adapter is no longer needed for programming)
• 2 position map switching function built in (map switch not included)
• Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
• Unit has a -100/+250% fuel change range
• 10 throttle position columns
• Enhanced “accel pump” utility (increased adjustment and sensitivity ranges)
• Retains all of the standard PyroPak control features
• Allows +/- 20 degrees of timing adjustment
• Map switch input-change maps on the fly
• Adjust timing per cylinder
• Built in 500 rpm rev limiter extension with the click of a button in the software program
• Raise your rev limiter further with a custom provided map after liability/release waiver is signed (contact DragonFire directly for more information)
• Fits all RZR XP 1000, RZR XP 4 1000 & RZR Models

Auto Tuner Option

The DragonFire Auto Tuner is an "add on" accessory that can be used with any of our PyroPak ECu controllers. It connects to the PyroPak with a single cable and requires only a ground and +12 volt connection to install. If your exhaust does not already have one, a "weld in" O2 sensor bung is included with the kit. This system takes virtually the same technology that Tuning Link dynamometer software (for automated Dyno tuning) uses, along with wide band O2 sensors and is designed to be used on your Side-X-Side to automatically tune and apply the settings for you on your PyroPak.

Once installed, the Auto Tune kit monitors the air/fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the PyroPak Controller and automatically corrects the settings to the optimal air/fuel ratio while you ride. This lets you simply plug in the unit and let it do the work so you don't have to mess with tuning and allows for maximum performance gains regardless or where or how you are riding your side X side!

Usually ships in 2-3 business days