Thunderhawk Mule 610 | Mule SX Skid Plate Package
Item# thunder-KM2108A
Description
The Thunderhawk Performance high strength aluminum front skid plate replaces the light-duty plastic front differential guard installed by the factory. Thunderhawk's front skid plate is designed to provide superior protection for the front differential, frame, A-arm mounts & inner CV boots on the Kawasaki Mule. The Thunderhawk front skid plate cover is wider than stock to provide additional protection for the inner CV boots and features a differential drain plug access hole as well as drainage slots to help evacuate mud and water.
The Thunderhawk center skid plate is designed to fill the void between the frame rails at the center of the vehicle, providing complete protection for the previously exposed driveshaft and floor pan. This skid plate also provides a smooth bottom skid- surface to reduce becoming hung-up on trail obstacles.
The Thunderhawk rear skid plate mounts below the swingarm, providing complete protection for the previously unprotected engine, CVT transmission, gear case, and rear suspension swingarm. The smooth bottom skid surface reduces the chance of becoming hung-up on trail obstacles. The Thunderhawk rear skid plate features an exclusive front engine guard design to protect the front of the plastic CVT cover and engine cooling fan cover from sticks or trail debris, which may be kicked up under the vehicle when riding. This rear skid plate features drainage holes to help evacuate mud and water, it does not need to be removed for routine maintenance, and it fits with most rear trailer hitches commonly used on the Mule 610 or Mule SX.
For anyone who rides in rough terrain, or if you are blazing your own trails through the rough, then this complete skid plate set is for you. Thunderhawk skid plates are designed and manufactured for years of service and reinforced to stand up to the harshest terrain. These skid plates could pay for themselves the first time you hit the trail and get high-centered or encounter a large rock, log or stick. Thunderhawk skid plates are precision CNC manufactured in the USA. All necessary hardware and illustrated instructions are included.
Features:
High strength, lightweight aircraft aluminum construction
Front skid plate designed to protect frame, differential & inner CV boots
Center skid plate provides complete protection for the previously exposed floor & driveshaft
Rear skid plate protects the previously exposed engine, gear case, transmission and suspension swingarm
Exclusive Thunderhawk rear skid plate design features front engine guards for added protection in the harshest off-road terrain
Smooth bottom skid-surface reduces odds of becoming hung-up on trail obstacles
Drainage holes help evacuate mud and water
Designed to fit with most common rear trailer hitches
Precision CNC manufactured in USA
Complete, easy to install kit, including hardware and illustrated instructions
Fits:2005 - 2016 Mule 610 & 610 XC
2017 & newer Mule SX (all 4x4 models)
The Thunderhawk center skid plate is designed to fill the void between the frame rails at the center of the vehicle, providing complete protection for the previously exposed driveshaft and floor pan. This skid plate also provides a smooth bottom skid- surface to reduce becoming hung-up on trail obstacles.
The Thunderhawk rear skid plate mounts below the swingarm, providing complete protection for the previously unprotected engine, CVT transmission, gear case, and rear suspension swingarm. The smooth bottom skid surface reduces the chance of becoming hung-up on trail obstacles. The Thunderhawk rear skid plate features an exclusive front engine guard design to protect the front of the plastic CVT cover and engine cooling fan cover from sticks or trail debris, which may be kicked up under the vehicle when riding. This rear skid plate features drainage holes to help evacuate mud and water, it does not need to be removed for routine maintenance, and it fits with most rear trailer hitches commonly used on the Mule 610 or Mule SX.
For anyone who rides in rough terrain, or if you are blazing your own trails through the rough, then this complete skid plate set is for you. Thunderhawk skid plates are designed and manufactured for years of service and reinforced to stand up to the harshest terrain. These skid plates could pay for themselves the first time you hit the trail and get high-centered or encounter a large rock, log or stick. Thunderhawk skid plates are precision CNC manufactured in the USA. All necessary hardware and illustrated instructions are included.
Features:
Fits:
