Trail Armor Kawasaki Teryx 800 | Teryx 4 CoolFlow Windshield
Item# TA010SHLD-KAW4
Description
Fits: 2016+ Kawasaki Teryx 800, 2016+ Kawasaki Teryx 4 2012-2015 Kawasaki Teryx 4, 2014-2015 Kawasaki Teryx 800 (Make sure to select correct year)
If you have ever ridden in a UTV with a full windshield you know how much dust can be sucked into the cab. The issue lies in the low pressure zone created by a full windshield. This low pressure zone acts as a vacuum and attracts all the dust your Teryx is kicking up. When no windshield is installed air flows freely through the cab and the air pressure inside is the same as the air pressure outside. However, this is often not a practical way to ride, whether it is cold weather, wet weather or debris often time a windshield is necessary. Luckily, Trail Armor developed the CoolFlow windshields as a way to project you from the elements while eliminating the low pressure zone keeping the dust from invading your cab.
The secret lies in the windshield's two piece construction. The CoolFlow allows you to take the bottom section off allowing air to flow freely into the cab and eliminating the low pressure zone, while the upper section protects your face from buffeting wind and debris. If it gets too cold or dust is not a problem simply attach the bottom piece and have the full protection of a full windshield.
The Teryx 800 CoolFlow windshield is made from 1/4" hard coated Lexan making it the thickest windshield on the market. The hard coating protects better against damage from branches, bushes and debris than standard Lexan. A rubber gasket seals the CoolFlow to the hood and quick connect clamps not only hold the windshield to the roll cage but make installation a breeze.
The Teryx 800 CoolFlow Windshields is DoT Approved, rated AS4 and engraved with requisite markings for easy identification.
Usually ships in 2-3 business days
If you have ever ridden in a UTV with a full windshield you know how much dust can be sucked into the cab. The issue lies in the low pressure zone created by a full windshield. This low pressure zone acts as a vacuum and attracts all the dust your Teryx is kicking up. When no windshield is installed air flows freely through the cab and the air pressure inside is the same as the air pressure outside. However, this is often not a practical way to ride, whether it is cold weather, wet weather or debris often time a windshield is necessary. Luckily, Trail Armor developed the CoolFlow windshields as a way to project you from the elements while eliminating the low pressure zone keeping the dust from invading your cab.
The secret lies in the windshield's two piece construction. The CoolFlow allows you to take the bottom section off allowing air to flow freely into the cab and eliminating the low pressure zone, while the upper section protects your face from buffeting wind and debris. If it gets too cold or dust is not a problem simply attach the bottom piece and have the full protection of a full windshield.
The Teryx 800 CoolFlow windshield is made from 1/4" hard coated Lexan making it the thickest windshield on the market. The hard coating protects better against damage from branches, bushes and debris than standard Lexan. A rubber gasket seals the CoolFlow to the hood and quick connect clamps not only hold the windshield to the roll cage but make installation a breeze.
The Teryx 800 CoolFlow Windshields is DoT Approved, rated AS4 and engraved with requisite markings for easy identification.
Usually ships in 2-3 business days
