Description
DESCRIPTION
High Lifter Polaris Snorkel Gear Transmission Tool (54-60872)
Not to be used with an impact wrench. This tool will be a huge asset to your shop. It is designed by the High Lifter team to help you properly remove or tighten the snorkel tube when replacing or upgrading the shaft or gear. Without this tool, it is very difficult to loosen the snorkel tube nut. There is currently no tool in a standard tool box that removes the nut easily. We stand behind the quality of our tool. If for any reason, pins are damaged, we'll replace the tool, no questions asked. It can also be used to check the output/snorkel gear in Polaris transmissions. If you service units and want to save time, this tool is a must!
If you are a mechanic, work at a dealership or are capable of rebuilding a transmission, this tool is for you! It is very difficult to loosen the snorkel tube nut, particularly when the nut is stuck or sticking due to debris or metal shavings from the transmission - this tool solves that problem.
FEATURES
- Hardened 5140 alloy steel components with zinc finish.
- Tool body accepts a 40mm wrench or socket as well as a 1/2in square drive to aid in installation and removal.
- 3 heads to adapt the tool for different applications. Two heads machined and one with replaceable extended tip set screws.
- 2 thread cleaning taps to remove chips and burs from transmission case.
- Components secured with 8mm grade 12.9 bolts.
- Pins to aid in tool assembly.
- Installation tools and hardware included with replacement pins and bolts.
- Main tool has precision pins align the pin slots in the snorkel gear nut
- Constructed of plain carbon steel, with 5 dowel pins for easy insertion
- Smooth chrome finish for easy cleaning
- Additional interchangeable caps that allow the tool to work on multiple transmissions
- Caps have alignment pins and magnets to lock and secure them to the main tool. Makes for easy change out!
- Tool Mates to OEM Part # 3234278, 3236120, 3235947 & 3236423
- Can be used with a 1/2" square drive ratchet for easy removal or insertion of the snorkel tube
DIMENSIONS
- Weight: 9.0
- Length: 16
- Width: 12
- Height: 12
NOTE
- This tool is NOT intended or recommended to be used with an impact wrench.
- This item is non-refundable.
- The main tool works on the most popular transmissions without the use of the additional adapters. The adapters will attach to the main tool using pin holes and magnets on the backside of the adapter. Once the adapter is attached to the main tool, it can then be used to repair additional transmissions.
FITMENT
- The main tool works with OEM part 3234278 (Ranger 570, 900/1000, General 1000, RZR 1000/900/570)
- Adapter 98V works with OEM parts 3235947 & 3236423 (ALL TURBO MODELS)
- Adapter 95D works with OEM part 3236120 (Ranger 1000 NEW BODY ALL MODELS)