HighLifter | 2018-2020 Polaris Ranger 1000 | XP 1000 | XP 1000 Crew | Rear Upper & Lower Control Arms

Fits:
2018 Polaris Ranger XP 1000 EPS
2018 Polaris Ranger XP 1000 EPS Northstar Edition
2019 Polaris Ranger Crew XP 1000 EPS
2019 Polaris Ranger Crew XP 1000 EPS High Lifter
2019 Polaris Ranger Crew XP 1000 EPS Northstar
2019 Polaris Ranger Crew XP 1000 Premium
2019 Polaris Ranger XP 1000 EPS High Lifter Edition
2019 Polaris Ranger XP 1000 EPS Northstar Edition
2019 Polaris Ranger XP 1000 EPS Ride Command Edition
2019 Polaris Ranger XP 1000 Premium
2020 Polaris Ranger 1000
2020 Polaris Ranger 1000 EPS
2020 Polaris Ranger 1000 EPS Winter Prep
2020 Polaris Ranger Crew 1000
2020 Polaris Ranger Crew 1000 EPS
2020 Polaris Ranger Crew 1000 EPS Winter Prep
2020 Polaris Ranger Crew XP 1000 High Lifter Edition
2020 Polaris Ranger Crew XP 1000 Northstar
2020 Polaris Ranger Crew XP 1000 NorthStar Premium
2020 Polaris Ranger Crew XP 1000 Northstar Ride Com
2020 Polaris Ranger Crew XP 1000 NorthStar Ultimate
2020 Polaris Ranger Crew XP 1000 Premium
2020 Polaris Ranger Crew XP 1000 Premium Ride Command
2020 Polaris Ranger Crew XP 1000 Texas Edition
2020 Polaris Ranger Crew XP 1000 Winter Prep
2020 Polaris Ranger XP 1000 EPS Texas Edition
2020 Polaris Ranger XP 1000 High Lifter Edition
2020 Polaris Ranger XP 1000 Northstar Edition
2020 Polaris Ranger XP 1000 Northstar Premium
2020 Polaris Ranger XP 1000 NorthStar Ride Command
2020 Polaris Ranger XP 1000 NorthStar Ultimate
2020 Polaris Ranger XP 1000 Premium
2020 Polaris Ranger XP 1000 Premium Ride Command
2020 Polaris Ranger XP 1000 Winter Prep

High Lifter control arms are designed to maximize ground clearance with a strategically arched lower control arm that provides better axle protection and visual appeal, without risking damage from excessive arch.

Precision-manufactured for an exact fit, most kits feature the High Lifter logo. Installation is easy with clear instructions, and stock bushings and ball joints can be used, with ball joints pre-installed for convenience.

It's recommended to check bearings, bushings, ball joints, and brake wear before installation to ensure everything is in good condition and save time.

Features:

25% larger than average stock arms - Crafted from 1 1/4” DOM steel

Up to 2.5x the wall thickness of an average stock arms - .120” wall thickness

Grease fittings included for most models

Added ground clearance featuring bends that maximize clearance and axle protection

Most stock powder coat colors available in stock

Easy to install and maintain

Limited Lifetime Warranty

NOTE: These arms are NOT rear raked.

If you are curious about how to install this product, you can view the Install Instructions here.

This item usually ships in 2-3 business days.