KFI Snow Plow for CF Moto ZForce 500

NOTE: Must have a winch to use plow system.


Applicability: Fits

• 2012 CFMOTO Teracross Z6
• 2013-15 CFMOTO ZForce 600 and ZForce 600EX
• 2014-20 CFMOTO ZForce 800 and ZForce 800EX
• 2016-20 CFMOTO ZForce 500
• 2018-19 CFMOTO ZForce 1000

Clear your big driveway of snow faster and easier than ever by adding a heavy-duty, easy-to-install Open Trail by KFI Straight Steel Blade Snow Plow to your CF Moto ZForce 600 or CF Moto ZForce 800! This blade has an easy on and off system so when you don’t need it you can just store it and hook back up in a snap when you are ready to work again. You will never have to worry again about getting out of your driveway.

This plow tubes features rugged American-built Grade 50 steel construction, shot-blasted and industrial powder coat finished for toughness that's measured in decades, not years. Features of the heavily reinforced tube system include: an easy-pull pin blade angle adjustment, multi-position plow lift bracket, 3 blade angle positions that rotate the blade up to 25 Degrees, and 6 five degree blade pitch adjustments. The system is attached in seconds using two standard 5/8" hitch pins. With this front-mount system you get 30+ inches of lift height. All of the plow components are shot blasted and powder coated tough for the best finish available.


Straight Plow Blade Specifications:

• 100% U.S.A. made
  
• Blade constructed of 11 gauge steel
  
• Measures 16" tall
  
• Snow can be pushed straight ahead or to the sides up to 25 degrees
  
• Gusseting added for the wider width and heavier UTV
  
• Fully adjustable blade skids with bolt-on brackets
  
• Heavy duty 3" diameter, grade-50 steel skid plates
  
• 3/16" grade 50 ribbing for strong bolt up to push tube with swivel mount
  
• Metal bead blasted before they are powder coated
  
• Powder coated metallic silver
  
• 2 sided 3/16" x 3.00" grade 50 steel wear bar
  
• Wear bar attached with heavy duty grade 8 bolts
  
• Complete instructions and mounting hardware included
• 2 year KFI warranty

Push Tube Specifications:

• 100% U.S.A. made
  
• Front mount design with 30"+ of lift height
  
• Heavy duty 1-1/2" 11 gauge steel tubing
  
• Heavy duty 1-1/4" thick 1-1-/2" diameter grade 50 pivot bushings
  
• 6" diameter zinc plated rotator bushing
  
• Easy pull pin blade angle adjustment
  
• Multi-position plow lift bracket
  
• 6 five degree blade pitch adjustments
  
• 3 blade angle positions that rotate the blade up to 25 degrees
  
• Fully adjustable blade skids with bolt-on brackets
  
• Metal bead blasted before they are powder coated
  
• Powder coated black
  
• Complete installation instructions and hardware included
  
• 2 year KFI warranty

Plow Mount Specifications:

• Front mount
• 100% U.S.A. made
  
• Plate constructed from 3/16" grade 50 steel
  
• All pin tabs are constructed from 1/4" thick grade 50 steel
  
• All plow tabs are tapered to help reduce hang ups while trail riding
  
• Bead blasted before they are powder coated
  
• Powder coated black
  
• Complete installation instructions and mounting hardware included
  
• 2 year KFI warranty

Options:

• Push Tube Extension: This push tube extension positions the blade further in from of your machine, giving you room to run tracks on your side by side while plowing, keeping your tracks from interfering with the snow plow operation.
• Blade End Shield: The blade end shields attach to both ends of your straight blade, letting you move dirt, gravel or other material
• Plow Markers (Pair): Steel 89 degree angled base and bolts to the side/ends of your steel straight blade.
• Plow Pulley: Recommended by the manufacturer for these models

Optional Plow Strap Features:

• For use with standard or wide winches
• Recommended to be used with roller fairlead
• Replaces a steel/synthetic winch line during plow season
• 64 inches of overall length
• Comes with 1" wide heavy duty strap and 3/16" synthetic attachment line
• Use your existing winch hook
• Multiple spool attachment options
• Maximizes winch pulling capacity
• 2,500 lb. break strength safety feature
• Protects winch from hits and impacts
• Eliminates damage to winch by avoiding cable stacking & binding
• Reduce wear on fairleads
• Designed for plowing
• Prolongs life of cable/synthetic rope

Optional Plow Lever Lift Features:

• Repositions lift attach point to help reduce winch and cable strain from lower mounted winches and bad cable angles
• Fully adjustable for multiple angles and attach points
• Designed to work with KFI UTV Push Tube #105635 ONLY
• Constructed of heavy duty 3/16” grade 50 steel
• Shot blasted before powder coating
• Powder coated tough black
• All hardware included
• Does NOT work with the plow actuator: #105935