Super ATV High Clearance 1.5" Forward Offset A-Arms for Polaris RZR 1000

Fits: Polaris RZR XP 1000 2014+
Polaris RZR XP 4 1000 : 2014+


Kit includes both Upper and Lower A-arms

• 1.5" Additional Clearance
• 1.25" Tube - 25% Larger Than OEM
• Stronger than OEM
• Pre-adjusted for easy install
• Includes free UHMW bushings!
• Lifetime Warranty

Are you looking to get more clearance or add larger tires to your Polaris RZR XP 1000, then you need a set of Super Atv's maximum clearance a-arms. Kit includes lower a-arms with 1 1/2" Forward Offset and are a unique dual bend design to add an additional 1 1/2" clearance over the stock Polaris OE arms. SuperAtv utilizes a 1.25" tube diameter in both the upper and lower arms which is 25% larger than the OE Polaris arms for extra strength and is backed by there Lifetime Warranty.

Super Atv's High clearance Forward Offset a-arms maintain the factory steering geometry so they will not add any additional wear and tear on other drive components like axles and tie rods and have full camber adjustability. Add on the Polaris RZR 1000 XP 3-5" Adjustable lift kit to get the ultimate clearance for your machine!

Install Instructions

***Optional Ball Joint Preassembly***

Want more time on the trails and less time in the garage? Purchase a set of ball joints and we will install them for you. You save money and time. No need to buy a press, or remove your old ball joints, and press them back in. We'll do all the work for free! Not only will we install ball joints, we will also install our nearly indestructible UHMW bushings for free too. That's right—you buy the ball joints and we give you pre-installed UHMW bushings at no additional charge.

Super Duty 300M Ball Joint 300M grade steel is the strongest ball joint material on the market. We took that material and combined it with our superior design engineering to make the strongest stud possible. That means minimal narrowing at the neck and an adjustable stud. At 2.25x stronger than stock, you can't buy a stronger ball joint than super duty 300M ball joint.

Heavy Duty Ball Joints Our heavy-duty ball joints are designed with ultimate performance and convenience in mind. Whether you’re doing flips or chasing hills, our proprietary blend of hardened 4340 VAR steel and zinc plating means this ball joint can take it. Our tests show that our ball joint can take double the pressure of an OEM ball joint!

NOTE: You must re-use your stock ball joints if you don’t select preassembly.

Usually ships in 1-2 business days