Polaris RZR 1.5-3 Inch Adjust. Lift Kit
Item# sup-LKP21-RZR
Description
Fits:
Polaris RZR 800 : 2008-2011 Polaris RZR 800 : 2012-2014*
Please Note: *2012-2014 will need to disconnect front sway bar If you have a 2011+, we recommend using aftermarket Rhino Brand Axles in the rear to prevent premature wear This kit will not work with dual exhaust or Walker Evans shocks
POLARIS RZR ADJUSTABLE LIFT KIT
1.5" to 3" INCH Adjustable Lift Kit for both Front and Rear
Get more ground clearance when you install a RZR adjustable lift kit. Lift Kit is Zinc Plated for long lasting durability and a great look. Perfect for adding additional ground clearance. The shocks are strategically place to allow a lower Spring Rate which inturn is not pinching the shock which requires it to use twice the pressure to keep the RZR Lifted. The will also help your CV's and CV joints to last longer as well.
Add this kit and you can raise your stock RZR from 1.5" to 3" over stock.
To adjust the lift kit to the other position simply raise the RZR off the ground, unbolt the shock from the upper mount and move the shock to the other hole. The inside hole will provide 2” of lift and the outside hole will provide 3” of lift. Note: If using the 3” lift hole, the rear shocks will need to be adjusted all the way out. If using the 2” lift, return the rear shocks to the stock location.
This kit is easy to install and your RZR will have an edge on the rest.
Usually ships in 3-4 business days
Polaris RZR 800 : 2008-2011 Polaris RZR 800 : 2012-2014*
Please Note: *2012-2014 will need to disconnect front sway bar If you have a 2011+, we recommend using aftermarket Rhino Brand Axles in the rear to prevent premature wear This kit will not work with dual exhaust or Walker Evans shocks
POLARIS RZR ADJUSTABLE LIFT KIT
1.5" to 3" INCH Adjustable Lift Kit for both Front and Rear
Get more ground clearance when you install a RZR adjustable lift kit. Lift Kit is Zinc Plated for long lasting durability and a great look. Perfect for adding additional ground clearance. The shocks are strategically place to allow a lower Spring Rate which inturn is not pinching the shock which requires it to use twice the pressure to keep the RZR Lifted. The will also help your CV's and CV joints to last longer as well.
Add this kit and you can raise your stock RZR from 1.5" to 3" over stock.
To adjust the lift kit to the other position simply raise the RZR off the ground, unbolt the shock from the upper mount and move the shock to the other hole. The inside hole will provide 2” of lift and the outside hole will provide 3” of lift. Note: If using the 3” lift hole, the rear shocks will need to be adjusted all the way out. If using the 2” lift, return the rear shocks to the stock location.
This kit is easy to install and your RZR will have an edge on the rest.
Usually ships in 3-4 business days
