Home > Polaris > Polaris GENERAL > Lift Kits | Suspension | Shocks > Super ATV | 2020+ Polaris General XP 1000 | XP 1000 4 | 6" Portal Gear Lift
Description
Fits:
Polaris General XP 1000 : 2020+
Polaris General 4 XP 1000 : 2020+
![](https://turbifycdn.com/ty/cdn/yhst-76800471066344/freeship.jpg)
The GDP 6 Portal Gear Lift for the Polaris General XP 1000 offers customizable gear reduction options of 30%, 45%, or 60%, and can be equipped with either cast or billet aluminum housings and single or dual idlers.
These portals are designed for various riding styles and are the most trusted and widely used in the industry. Dual idlers provide enhanced performance by distributing the load for consistent torque transfer and unmatched strength. Made from precision-cut 9310 alloy steel, these gears ensure durability and efficiency.
Portals are ideal for muddy conditions, providing a 6 lift and significant torque to navigate deep mud without getting stuck. The gear reduction at the hub reduces stress on the axles, differential, prop shaft, and transmission, extending their lifespan even under hard riding conditions.
The gears, made from precision-ground 9310 alloy steel, offer smooth and quiet operation. The portal housings, whether cast or billet aluminum, are reinforced for strength and designed for optimal oil flow and gear forces. Advanced gaskets and seals prevent oil leaks, while the double-angular contact bearings handle heavy loads effectively. The universal hubs accommodate various bolt patterns, making them compatible with most side-by-side tires. The tapered output shaft ensures a secure lock without wobbling or wearing over time.
For additional support, SuperATV offers a dedicated team to assist with portal setup and selection.
Features:
Polaris General XP 1000 : 2020+
Polaris General 4 XP 1000 : 2020+
![](https://turbifycdn.com/ty/cdn/yhst-76800471066344/freeship.jpg)
The GDP 6 Portal Gear Lift for the Polaris General XP 1000 offers customizable gear reduction options of 30%, 45%, or 60%, and can be equipped with either cast or billet aluminum housings and single or dual idlers.
These portals are designed for various riding styles and are the most trusted and widely used in the industry. Dual idlers provide enhanced performance by distributing the load for consistent torque transfer and unmatched strength. Made from precision-cut 9310 alloy steel, these gears ensure durability and efficiency.
Portals are ideal for muddy conditions, providing a 6 lift and significant torque to navigate deep mud without getting stuck. The gear reduction at the hub reduces stress on the axles, differential, prop shaft, and transmission, extending their lifespan even under hard riding conditions.
The gears, made from precision-ground 9310 alloy steel, offer smooth and quiet operation. The portal housings, whether cast or billet aluminum, are reinforced for strength and designed for optimal oil flow and gear forces. Advanced gaskets and seals prevent oil leaks, while the double-angular contact bearings handle heavy loads effectively. The universal hubs accommodate various bolt patterns, making them compatible with most side-by-side tires. The tapered output shaft ensures a secure lock without wobbling or wearing over time.
For additional support, SuperATV offers a dedicated team to assist with portal setup and selection.
Features:
- Available with billet or cast aluminum housing
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- Increases width by 4 in. per side (8 in. total)
- 1.5 in. diameter 4340 hardened steel driveshaft
- Housings use advanced gaskets that dont let anything through
- Universal hub fits all major bolt patterns
- Gear reduction reduces stress on your drivetrain
- Weighs 224 lb. total, which is 25+ lb. lighter than the competition
6 Portal Gear Lift Kit Includes:
-(4) Assembled portal hub boxes complete with 9310 gears, seals, output shaft, gaskets, and thrust bearings.
-(4) Universal hubs and precision-ground stainless steel slotted rotors with lugs
-(4) Specialized steel alloy backing plates
-(4) Steel caliper mounting plates
-(4) Caliper adapter plates
-(2) Steel steering arms
-Extended brake lines
-All required hardware, including recessed castle nut socket
Wheel Requirements:
-18 or larger wheel required
-18 wheels cannot exceed 4-1/2 backspacing
-20 and larger wheels cannot exceed 5 backspacing
-Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1 wheel spacer
If you are curious about how to install this product, you can view the Install Instructions here.
If you are curious about how to install this product, you can view the Install Instructions here.
If you are curious about how to install this product, you can view the Install Instructions here.
This item usually ships in 2-3 business days.