Denali | CF Moto ZForce 800 | 60" UTV Snow Plow System

Fits:
2014-2022 CFMOTO ZForce 800
2014-2022 CFMOTO ZForce 800 EX
2016-2022 CFMOTO ZForce 500
2018-2019 CFMOTO ZForce 1000



DENALI UTV Snow Plows are built for tough conditions, efficiently handling snow, sand, and ice.

The 65-degree attack angle and over-center design allow snow to roll and be thrown forward effectively. The plow's central mounting position disperses impact force to the UTV's strongest points, protecting the front end from damage.

The easy-connect system enables quick attachment and removal, while the durable mount plate can stay on the UTV year-round.

A winch (sold separately) is required to operate the plow, with VIPER winches recommended for optimal performance.

Kit Includes:
-UTV Snow Plow Blade - Straight
-Push Tubes
-Wear Bar
-Skid Feet
-Installation Hardware and Instructions

Blade Features:

Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel

Four 7 gauge ribs run the full height of the blade

Three additional 7 gauge horizontal stabilizers support the deepest point of the blade

65° attack angle and over center design ensures snow rolls up and is thrown forward

Replaceable 7gauge steel wear bar included with every kit

Height and angle adjustable skid feet included

Pushtube Features:

Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength

Turn system allows you to easily position your plow in 10 different angles - 0, 12.5°, 25°

Simple detachment system with the pull of a pin

Structural tube steel cross bar for added lateral rigidity

Quick Release Pins included

13.5 inches center to center for plow mount tabs

Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Pushtube Lift Kits:

Pushtube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift

Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground

Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)

Optional Hydroturn Features:

NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid

Change the blade angle while driving; full radius turn in just 5 seconds

Heavy duty chrome plated ¾″ cylinder shaft

No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes

Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:

Roller
-Replaces the winch fairlead during the plow season
-For use with Steel AND Synthetic cables
-Curved cable groove helps eliminate flattening and breaking of cable
-Standard Spool Bolt Pattern: 3" x 4.875"
-Wide Spool Bolt Pattern: 3" x 6.67"

Sheave
-Includes pulley, 1/4" clevis hook and nylon strap
-Allows greater precision when raising/lowering plow blade and increases the angle of pull

Cable
-12' length, 1/4" diameter
-Single braid, dyneema rope with galvanized steel thimble/eyelet

If you are curious about how to install this product, you can view the Install Instructions here.

NOTE: CANNOT SHIP TO ALASKA OR HAWAII

This item usually ships in 3-4 business days.