SuperATV Polaris Ranger XP 900 8" Portal Gear Lift

SuperATV Polaris Ranger XP 900 8" Portal Gear Lift (PGH8-1-34)

Gear Down and Go Big

For the best performance and the biggest lift on your Polaris Ranger XP 900, you need a set of 8"� GDP Portals. They give you the ground clearance you need to fit big tires, and with your choice of a 45% or massive 60% gear reduction, you'll have wicked torque that'll rip through anything. If you want to turn your Ranger into the ultimate party wagon, get an 8"� GDP Portal Gear Lift and get ready to have fun.

GDP the Most Trusted Name in Portals

Next time you're out at the ride park, take a look around at the suspension setups you see. You're bound to see more than a few GDP Portals. That's because more riders roll on GDP portals than any other portal system. Thousands ride on them every weekend, and with that much trail time, you know they're real-world proven.

45% and 60% Gear Reductions Dominate Mud

Getting wild in the mud is all about going as big as you can. With 8"� portals and a huge 45% or 60% gear reduction, you can go bigger than you thought possible. You have the ground clearance to keep from getting swamped and the gear reduction to turn monster mud grips through the bounty holes that swallow other riders whole.

A Gear Reduction That Protects Your Drivetrain

Portal gear lifts reduce the stress on your axles, differentials, prop shafts, and transmission. That's because GDP puts the gear reduction in the hub instead of the transmission. Your machine's drivetrain will last longer than running stock, and you can have more fun than anyone else.

Learn more about how tire size and gear reduction can unleash your machine's potential.

Unmatched Gear Material
These aren't amature gears, they're top-of-the-line. We make them with precision-ground, 9310 alloy steel so they run quiet and they don't quit. They're designed for the extreme riding you love.

Stronger Housings by Design
You think you can find a better set of housings? Think again. We make our housings stronger by design. We have the technical design experience and the real-world beat-down experience to know what portal housings need to last. So whether you choose cast or USA-made billet aluminum, you're getting a kick-ass housing with unmatched strength and reliability. We've got the riders on the trail to prove it.

• Our housings are reinforced in all the right places
• They're built with better oil flow and gearing forces in mind
• There are no gimmicks and no vents because vents do more harm than good we know because we tested them

The Strongest Portal Backing Plates You Can Get

We use an advanced steel alloy for our 5/16"� steel backing plate to make them the strongest in the world. This isn't your grandma's steel it's stronger than chromoly and it's designed for ultra-high force applications. These won't break or bend over time.

Advanced Gaskets and Seals

Whether you go with cast or billet, both housings use:
Advanced Thermo-Tork gaskets with excellent oil resistance and a lower deterioration rate than Kevlar gaskets
Rubber O-rings that completely seal the housings
A sealed input gear and double-lipped output seal
100% sealing coverage throughout so you can forget about oil leaks
Bearings That Rock
Our gears are only as strong as the bearings that hold them, that's why we use a double-angular contact bearing. It's designed to take huge hits from every direction without wearing prematurely. It's the battle-tank of bearings. Built for battle components make GDP the best.

Universal Hubs and Slotted Rotors

Our precision-ground, stainless steel slotted rotors stay cool to give you the braking power you need when you need it. They come with 4/156, 4/137, 4/115, and 4/110 bolt patterns and lugs so you can use wheels from just about any side-by-side. We invented the tapered output shaft that our hubs attach to, which provides a more secure lock that won't wobble or wear over time.

Frame Stiffener Required

An 8"� portal kit is a heavy-duty piece of hardware for heavy-duty machines, and as awesome as the Ranger XP 900 is, it's not quite up to snuff. That's why a frame stiffener is required. Trust us we've hit enough bumps to know that bending a stock frame can happen. Don't do it. Get a frame stiffener.

Features

• Available with billet or cast aluminum housing
• Cool, quiet, precision ground gears made from 9310 alloy billet steel
• 1.5 in. diameter 4340 hardened steel drive shaft
• 1.5 in. forward and rear offset
• Housings use Thermo-Tork gaskets and rubber O-rings that don't let anything through
• Universal hub fits all major bolt patterns
• Gear reduction reduces stress on your drivetrain

Wheel Requirements

• 22" or larger wheel required
• Wheels cannot exceed 5" backspacing

FITMENT

• Polaris Ranger XP 900 : 2013-2019
• Polaris Ranger XP 900 Crew : 2014-2019

NOTE

• Frame stiffener does NOT fit High Lifter Edition
• Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1"� wheel spacer.