VIAIR Cross Country Continuous Duty On Board Air System - 200 PSI / 2.24 CFM - #50025
The Cross Country Continuous Duty OBA by VIAIR® operates at 200 PSI with a flow rate of 2.24 CFM from a 1.5 gallon tank and powered by a 485C Platinum compressor. Van Life OBA's are capable of quick tire inflation and other pneumatic tasks with all accessories necessary for installing a working system in your vehicle.
NOTE: Use thread sealant for proper installation. Thread tape is not recommended. Properly sealed, recommended torque for 1/8 is 10 ~ 11 ft. lbs. Recommended torque for 1/4 and 3/8 is 16 ~ 18 ft. lbs.
Specifications:
- 12-Volt
- Permanent Magnetic Motor
- Duty Cycle: 100% @ 200 PSI
- Max. Working Pressure: 200 PSI
- Max. 12V Amp Draw: 23-Amps
- Ingress Protection Rating: IP67
- 485C Platinum VIAIR® Compressor w/ Thermal Overload Protector
- 1.5 Gallon Matte Black VIAIR® Air Tank (200 PSI)
- Illuminated Dash Panel Gauge Kit, Black Face 200 PSI
- Sealed Pressure Switch (165 PSI on, 200 PSI off)
- 40-Amp Sealed 4-Prong Relay
- Mini ANL Fuse Holder w/ 40-Amp Fuse
- RV Tire Inflation Gun w/ Digital 180 PSI Gauge
- 30ft. Inside Braided Black Coil Hose w/ Quick Connect & stud
- 90-Degree Twist-on 40 Chuck Air Hose
- 45-Degree Dually Extended Reach Chuck
- Air Source relocation Kit
- Rubber-Tipped Blow Gun
- 1/4" (M) to 1/8" (F) NPT Reducer
- 3/8" (F) to 1/4" (M) NPT Reducer
- 5pc. Tank Port Fittings Kit (For 200 PSI Rated Systems)
- VIAIR® Storage Bag
- Installation Instructions
Features: